VESDA & FAAST FLEX Detectors

VESDA-E VES with 3.5 inch Display, Plastic Enclosure

View larger

Display all pictures

VESDA-E VES with 3.5 inch Display, Plastic Enclosure

Part Number: P-VES-A10-P

Sector addressability for up to four sectors
Adaptive scan threshold
Flair detection technology delivers reliable very early warning in a wide range of environments with minimal nuisance alarms
Multi stage filtration and optical protection with clean air barriers ensures lifetime detection performance
Four configurable alarm levels per sector and a wide sensitivity range deliver optimum protection for the widest range of applications
Intuitive LCD display provides instant status information for immediate response
Flow fault thresholds per port accommodate varying airflow conditions
Smart on-board filter retains dust count and remaining filter life for predictable maintenance
Extensive event log (20,000 events) for event analysis and system diagnostics
AutoLearn™ smoke and flow for reliable and rapid commissioning
Backward compatible with VLS and VESDAnet
Ethernet for connectivity with Xtralis software for configuration, secondary monitoring and maintenance
Secondary monitoring and maintenance via WiFi
USB for PC configuration, and firmware upgrade using a memory stick
Two programmable GPIs (1 monitored) for flexible remote control
Field replaceable sub-assemblies enable faster service and maximum uptime

Sector addressability for up to four sectors
Adaptive scan threshold
Flair detection technology delivers reliable very early warning in a wide range of environments with minimal nuisance alarms
Multi stage filtration and optical protection with clean air barriers ensures lifetime detection performance
Four configurable alarm levels per sector and a wide sensitivity range deliver optimum protection for the widest range of applications
Intuitive LCD display provides instant status information for immediate response
Flow fault thresholds per port accommodate varying airflow conditions
Smart on-board filter retains dust count and remaining filter life for predictable maintenance
Extensive event log (20,000 events) for event analysis and system diagnostics
AutoLearn™ smoke and flow for reliable and rapid commissioning
Backward compatible with VLS and VESDAnet
Ethernet for connectivity with Xtralis software for configuration, secondary monitoring and maintenance
Secondary monitoring and maintenance via WiFi
USB for PC configuration, and firmware upgrade using a memory stick
Two programmable GPIs (1 monitored) for flexible remote control
Field replaceable sub-assemblies enable faster service and maximum uptime

Send to a friend

Downloads

Product Information

How it Works

The VES draws air from all sectors in use. If the smoke level reaches the Adaptive Scan Threshold, the VES quickly scans each sector to identify which sector is carrying smoke. The first sector to reach the Alert level is designated as the First Alarm Sector (FAS) and this sector is signalled to the user. If two or more sectors reach the Alert level then, the sector with the highest smoke concentration is designated as the First Alarm Sector (FAS). Once Fast Scan is completed and the FAS identified, the VES continues to closely monitor all four sectors to track fire growth and maintain full protection of the area.

Flair Detection Technology

Flair is the revolutionary detection chamber that forms the core of the VESDA-E VES, providing higher stability and increased longevity. Direct imaging of the sampled particles using a CMOS imager combined with multiple photo-diodes allows better detection and fewer nuisance alarms.

The VES Display

The VES display Home page has a bar graph to indicate the smoke level and adaptive scan threshold. Fault icons are also included to indicate various fault conditions. When the adaptive scan threshold is exceeded the VES display automatically transitions to the Sector status page to indicate the smoke level and alarm level per sector. If alarms are configured as latched then alarm indication per sector will be retained until Reset is applied. The VES display can only return to the Home page under user control.

Installation, Commissioning and Operation

VESDA-E VES is equipped with a powerful aspirator that enables the use of 560 m (1,837 ft) of total pipe length. Out of box operation is made possible with AutoConfig which allows airflow normalisation and AutoLearn Smoke and Flow to be initiated from within the detector. VES is fully supported by Xtralis VSC and ASPIRE software applications which facilitate ease of pipe network design, system commissioning and maintenance.

VESDAnet™

VESDA devices communicate on VESDAnet which provides a robust bidirectional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring.

Ethernet and WiFi connectivity

VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and PC’s installed with Xtralis monitoring and configuration software to connect wirelessly to the detector via the network.

Backward Compatibility

VESDA-E VES is compatible with existing VESDA installations. The detector occupies the same mounting footprint, pipe, conduit and electrical connector positioning as VESDA VLS. VES is also compatible with existing VESDAnet installations allowing monitoring of both VESDA-E and legacy detectors via the latest iVESDA application.

Typical Applications

Data centre
Warehouse
Prison/COrrectional
Airport
Clean Room
Large Atrium

Specifications

Supply Voltage	18-30VDC (24V Nominal)
Power Consumption @ 24 VDC	P-VES-A00-P			P-VES-A10-P
Aspirator Setting	1	5	10	1	5	10
Powe r (Quiescent)	7.9 W	9.7 W	14.8 W	8.6 W	10.5 W	15.4 W
Power (In Alarm)	8.5 W	9.9W	14.5W	9.4W	10.8W	15.2W
Dimensions (WHD):	350 mm x 225 mm x 135 mm
Weight	4.3kg			4.4kg
Operating Conditions	Ambient: 0°C to 39°C Sampled Air: -20°C to 60°C Tested to: -20°C to 55°C UL: -20°C to 50°C
	Humidity: 10% to 95% RH, Non-condensing
Area Coverage (max)	2000m2
Min. Airflow Per Pipe	20 l/m
Pipe Length (Linear)	280m
Pipe Lengths (Branched)	560m
Pipe lengths depending on number of pipes in use	2 Pipe: 100m 3 Pipe: 80m 4 Pipe: 70m
No. of holes (A/B/C)	40/80/100***
Computer design tool	ASPIRE
Relays	12 programmable relays (latching or non-latching states) Contacts rated 2 A @ 30 VDC (Resistive)
IP Rating	IP40
Cable Access	4 x 26 mm (1.02 in) cable entries
Cable termination	Screw Terminal blocks 0.2–2.5 sq mm (24–14 AWG)
Dynamic Range	0.001% to 32% obs/m (0.0003% to 10% obs/ft)
Sensitivity Range	0.005 to 20% obs/m (0.0016% to 6.25% obs/ft)
Threshold setting range	Alert: 0.005% to 2.0% obs/m (0.0016% to 0.625% obs/ft) Action: 0.005% to 2.0% obs/m (0.0016% to 0.625% obs/ft) Fire1: 0.010% to 2.0% obs/m (0.0031% to 0.625% obs/ft) Fire2: 0.020% to 20.0% obs/m (0.0063% to 6.25% obs/ft)
Software features	Event log: Up to 20,000 events Smoke level and alarm threshold levels, user actions, alarms and faults with time and date stamp AutoLearn: Detector learns Alarm Thresholds and Flow Fault thresholds by monitoring the environment

* Product UL listed for use from 0°C to 38°C (32°F to 100°F). ** Sampled Air temperature shall reach Detector Ambient temperature upon entry into Detector. Refer to Xtralis Design Guides & Application Notes for sampled air pre-conditioning. *** Subject to agency confirmation.