Close

Dry Barrel Sprinklers

VK188 - EC/QREC Dry Horizontal Sidewall Sprinkler (K5.6) View larger

VK188 - EC/QREC Dry Horizontal Sidewall Sprinkler (K5.6)

Viking Standard/Quick Response Extended Coverage Dry Horizontal Sidewall Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. The sprinklers are designed for dry systems and preaction systems where it is necessary to prevent water or condensation from entering the drop nipple before sprinkler operation. They may also be installed in spaces subject to freezing and supplied from a wet system in an adjacent heated area. The special Polyester and Electroless Nickel PTFE (ENT) coatings have been investigated for installation in corrosive atmospheres and are cULus listed as corrosion resistant.  Refer to the technical data sheet for design and installation requirements.

Note: This product is made to a custom length. Please specify the length by leaving a message upon checkout.

Viking Standard/Quick Response Extended Coverage Dry Horizontal Sidewall Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. The sprinklers are designed for dry systems and preaction systems where it is necessary to prevent water or condensation from entering the drop nipple before sprinkler operation. They may also be installed in spaces subject to freezing and supplied from a wet system in an adjacent heated area. The special Polyester and Electroless Nickel PTFE (ENT) coatings have been investigated for installation in corrosive atmospheres and are cULus listed as corrosion resistant.  Refer to the technical data sheet for design and installation requirements.

Note: This product is made to a custom length. Please specify the length by leaving a message upon checkout.

  • Send to a friend

    Send to a friend

    VK188 - EC/QREC Dry Horizontal Sidewall Sprinkler (K5.6)

    VK188 - EC/QREC Dry Horizontal Sidewall Sprinkler (K5.6)

    Recipient :

    * Required fields

      or  Cancel

  • Features

    • K Factor: 5.6 (USA) / 8.1 (NZ)
    • Maximum Spacing: 4.9 x 6.1m
    • Maximum Working Pressure: 175 psi (12 bar)
    • Minimum Spacing: Per Standards / Listings
    • Model Number: VK188
    • Occupancy Type: Light Hazard
    • Response Type: Standard/Quick
    • Thread Size: 1" NPT (25 mm BSP)

    30 other products in the same category

    Close